Welcome to my blog!

On this blog you'll find all of my Knex creations! Here I'll have my models, plus updates of any major projects. I made this blog in June 2009, when I began construction on Cataclysm.

I'm on lots of other websites besides this one. Here's some links:

The Knex Forum: here I upload all of the images of my models. Go to my profile to see my albums, groups, etc.

Instructables: I'm most active on this site. Here's my profile. Here I upload instructions for lots of my projects. You'll also find slide shows, videos, and more.

Youtube: here's where I upload my videos. Go to my channel to watch them!

Make sure to follow this blog for updates on my models!


Saturday, January 1, 2011

Inverted Double Helix Lift

This lift is one that I recreated from Cataclysm. It's different than the original double helix lift because there is a tower in the center that spins around, and the helix is on the outside. This makes it more efficient, because it can be made much higher.

Click here for the instructions! The one in the instructions isn't very tall, but it's easy to modify to make taller.

Here is a video.

6 comments:

  1. I see that one "ring" out of the 2 of tubing isn't used. Maybe it's changeable with 2 entrances, and 2 exits that both parts are used.

    ReplyDelete
  2. I made this without using instructions provided on instructables it is easier than I thought.

    ReplyDelete
  3. It is a lift to the ball machine and a lift reverse double helix. This lift has been featured in a cataclysm.

    ReplyDelete
  4. This is an elevator, which was introduced in Cataclysm, and I rebuilt! It is much more effective than conventional propeller lift.

    ReplyDelete
  5. The Commission, EU's executive arm, proposed the law, "in the coming days," Michel Barnier, the EU's financial services director said today.

    ReplyDelete
  6. One test well showed initial 85% sand, 15% heavy oil content. Tool was installed in well on April 19/05 and the well has been pumping continuously ever since.

    ReplyDelete